JUNIOR 52
Machine Characteristics
- Start with lamination was never easier. Two types of feeders enable easy upgrade from manual to automatic feeding while the upgrade is possible on site.
- Brilliantly simple and compact solution for offset as well as digitally printed jobs up to B2 format.
Basic configuration
Feeder:
- Feeding table for manual sheet loading.
- Built-in air supply (no external connection needed).
- Adjustable guide plates for thin sheets processing.
- Automatic sheet overlap control.
- Sheet overlap sensor to protect the pressure roller from the laminate adhesive sticking.
Laminating Unit:
- Side-adjustable unwinding shaft with adjustable brake force.
- Height-adjustable and removable spread roller perfectly removes wrinkles from laminate.
- IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation.
- Rubber coated pressure roller.
- Adjustable distance stoppers for lamination unit to enable processing thick substrates
and windows lamination. - The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results.
Separator & Delivery:
- Decurling unit consisting of bar and roller elements to reach flat result also for difficult thin or duplex printed sheets.
- Built-in film perforator and skewing wheel to enable sheet separation.
- Snapping unit with fixed snapping speed and unique tilting mechanism
to define snapping moment. - Fixed delivery desk.
SW functions included
- Zero overlap option for thick sheets processing.
- Choice of measuring units.
- Intuitive user interface with built-in diagnostics and troubleshooting.
Options
- Additional guiding bar for comfortable manual feeding.
- Additional desk for easy loading of long sheets.
- Top suction belt feeder for pile stack feeding with possible upgrade on site.
- Teflon pressure roller with non-sticking surface to reduce film or duplex print marking.
- Airshaft
- Film slitter to cut film roll to the required width.
- Additional On roll perforator.
- Integrated Effect foiling device (OTF) with possibility to apply PSA film too.
- Effect foiling device with possibility to apply PSA film too.
- External Effect foiling device (OTF).
- 1″ unwinding shaft for effect films.
- Air ionizer for smooth sheets unloading without static charge.
- Roll lift for comfortable handling of laminating film rolls.
- Connection to the external supply of pressure air.
Technical specifications
| Parameter | Value |
|---|---|
| Max. production speed | 15 m/min (1273 B2 sheets/h) |
| Max. sheet size | 520 x 710 mm (800 mm with optional roll on perforator) |
| Min. sheet size | 200 x 250 mm |
| Paper weight | 115-350 gsm |
| Max. paper pile height | 26 cm |
| Laminating roller heating | One-zone IR heating |
| Heat-up time | 5-6 minutes |
| Overlap accuracy | ± 1 mm |
| Dimensions (manual feeding with delivery desk) | 2.30 x 1.00 m |
Min. sheet dimensions | 200 × 250 mm |
Thickness of laminating film | 24-40 μm |
Kind of laminating film | OPP |
Time of laminating cylinder warm up | Cca. 3.5 min |
Sheet overlap accuracy | ± 1 mm |
Consumption of compressed air | 20 l/min |
Max. consumption of compressed air | 30 l/min |
Max. pressing force | 12 kN |
Max. linear nip pressure | 23 N/mm |
Max. consumption of electricity | 3.5 kW |
Power supply (EU version) | 3.5 kVA |
Power supply (US version) | 3.5 kVA |
Machine weight | 460 kg |
Recommended machine capacity | 100 000 sheets/month |
| Parametr | Hodnota |
|---|---|
| Min. rozměry archů | 20 × 20 cm |
| Tloušťka laminovací fólie | 24-50 μm |
| Druh laminovací fólie | OPP, PET, Nylon |
| Doba zahřátí laminovacího válce | Cca. 3.5 min |
| Přesnost přesahu archů | ±1 mm |
| Vzduchová přípojka | Min. 6 bar |
| Spotřeba tlakového vzduchu | 8 l/min |
| Max. spotřeba tlakového vzduchu | 8 l/min |
| Max. přitlačovaná síla | 12.8 kN |
| Max. lineární tlak v nipu | 35.5 N/mm |
| Max. spotřeba elektřiny | 2.1 kW |
| Napájení (verze EU) | 2.6 kVA |
| Zdroj napájení (americká verze) | 3.1 kVA |
| Hmotnost stroje | 240 kg |
| Doporučená kapacita stroje | 100 000 archů/měsíc |
Custom-built solutions
Possibility of individual machine modification based on specific requirements
* Technické parametry našich výrobků se mohou změnit bez předchozího upozornění.
* Fotografie / videa produktů mohou obsahovat další opce, které nejsou součástí standardní dodávky.